Holder for bolt fixing
Stud mount
STUDMNT-CBLTIE-BLCK-M8-(2,3-7,6MM)
Register now and access more than 20,000 products
- Mounting on holders such as screws, blind rivet bolts and welded studs
- Suitable for a variety of common bolt sizes and cable connectors
- Wide range of positioning configurations for flexible use
- Screw holders for faster installation than with metal clips
- Suitable for use under the most difficult conditions thanks to the weather-resistant material polyamide 6.6
- Maintains a distance from the longitudinal frame member to prevent abrasion on the bundle during operation
- Insensitive to vibrations
- Secures bundles with cable connectors – up to four separate bundles per installation
- Remains on the vehicle during maintenance or repair – the bundle is reattached with new cable connectors
- UV-resistant and weather-resistant
Datasheets(X)
- Management of cables and hoses along the longitudinal frame members
- Mounting a bundle under the chassis unit
- Management of cable harnesses in cab, sleeping cabin and trailer
- Making use of unused screw pillars already available in the vehicle
- Maintaining a distance from the frame to avoid abrasion
- Brackets are designed to utilise existing vehicle screw mounts for attaching cable ties to bolts.
- These simple cabling accessories can be installed using a slight tap from a hammer, by screwing on the bracket or with the special installation tool.
- These fixtures can be used for a variety of cable ties.
Suitable for cable ties | 2.3 - 7.8 mm |
Width (a) | 12.2 mm |
Diameter of hole (c) | 8.0 mm |
Length (d) | 31.8 mm |
Height (h) | 24.1 mm |
Material | PA 6.6 - Polyamide |
Halogen-free | Yes |
Silicone-free | Yes |
Colour | Black |
Last viewed
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagonal bolt with thread up to the head
Single wire seal (SEAL) For uninsulated cable connector
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Twist Drill bits HSS ASME B94.11M TYPE RN