Hollow profile fastener BoxBolt^® HDG Steel, hot-dip galvanised, with CE marking

Name: Hollow profile fastener BoxBolt ® HDG Steel, hot-dip galvanised, with CE marking
Brand: Würth
SKU: 048591011

BoxBolt hexagon, steel, hot-dip galvanised CE
HLSECTFSTNR-BQ1G10-(5-23)-HDG-M10-CE

Art.-no. 048591011

EAN 4062856348398

All versions

Similar products

Prices for customers after login

Hollow profile fastener BoxBolt^® HDG Steel, hot-dip galvanised, with CE marking

Art.-no. 048591011

Prices for customers after login

Quantity

x 25 pcs

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

The mechanical material properties of the screws correspond to strength class 8.8 in accordance with DIN EN ISO 898-1

Notice

Never exceed the permissible working loads. Before using hollow section fasteners, always check that the steel structure can withstand the required loads.

ETA 20/1174

BoxBolt^® is a registered trademark of Access Technologies Limited, GB.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For fastening to hollow sections or other hard-to-reach components. The fastener is especially suitable for applications where the installation point is only accessible from one side.

Instructions

The connection is produced by tightening the screw while bracing the sleeve collar, resulting in expansion of the sleeve. The tightening torques can be applied using a torque wrench. The hollow section fastener is only approved for one-time use!

We recommend the BoxSok^TM special tool for installation.


Thread type x nominal diameter	M10
Screw length (l)	50 mm
Width across flats (S)	16 mm
Width across flats, sleeve (S_Hü)	24 mm
Sleeve diameter (d_HÜ)	17.5 mm
Collar thickness (k_Hü)	7.4 mm
Sleeve length (l_Hü)	40 mm
Min./max. grip length (l_k)	5-23 mm
Nominal drill hole diameter	18 mm
Tightening torque	45 Nm
Min. hole distance (A)	40 mm
Min. edge clearance (B)	15 mm
Material	Steel
Surface	Hot dip galvanized
RoHS-compliant	Yes