Impact cap
Bump cap with ventilation holes
BUMPCAP-EN812-GREY
Register now and access more than 20,000 products
- Outer material: 100% cotton
- Hard plastic inner shell
- Foam padding on the shell and built-in ventilation holes for comfort
- Adjustable with riptape fastening
- Built-in sweatband
- Covering washable at up to 30°C
The impact caps are designed to protect the wearer from light impacts and scratches. They do not protect against the effects of falling or thrown objects or moving, hanging loads. Under no circumstances may the impact cap be used in place of an industrial hard hat in accordance with EN 397.
Datasheets(X)
Mechanics, electricians and installers; automotive industry; work on lifting platforms, on shelves and in warehouses; interior design work and many other uses. Wherever the head needs protecting from impacts.
Colour | Grey |
EN standard | 812 |
Min./max. size | 54 cm-59 cm |
Last viewed
Twist Drill bit HSCO DIN 338 TYPE RN
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Plain washers - large series ISO 7093-1 A4 stainless steel 200 HV plain
Screw-on fastening base
O-ring, imperial NBR 70
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Screw-on fastening base
Strip fuse, DIN 72581, plastic