Insulation nail W-IN
Insulation nail W-IN 50mm
DWL-(W-IN)-PLA-D50MM-60-8X80
Register now and access more than 20,000 products
- High-quality PP
- Thermally stable from -40°C to +80°C
- Small drill hole diameter (8 mm)
- Quick, easy installation
- Low insertion depth, min. 20 mm — less time drilling
- Anchor without expansion nail
Drill the hole
Set anchor in place
Fasten insulation, knock in anchor until flush
Datasheets(X)
- For attaching insulation materials for façades with rear ventilation
- For attaching film, sealing membrane outside cellars
- Can be used in various solid surfaces, e.g. concrete, solid sand-lime brick, clay brick
- For attaching hard, self-supporting insulation materials, e.g. polystyrene, rigid foam panels
Anchor length (l) (l) | 80 mm |
Max. attachment height (d a) (da) | 60 mm |
Disc diameter | 50 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h s) | 20 mm |
Drill hole depth (t) | 25 mm |
Material | PP - Polypropylene |
Halogen-free | Yes |
| Performance data | |||
| Base diameter [mm] | 50 | ||
| Recommended working load | Concrete ≥ B25 | Frec [kN] | 0,11 |
| Solid calcium silicate block KS12 | 0,10 | ||
| Masonry brick MZ12 | 0,10 | ||
| Characteristic values | |||
| Drill hole depth | t ≥ [mm] | 25 | 25 |
| Embedment depth | hS ≥ [mm] | 20 | 20 |
| Nominal drill diameter | ddrill [mm] | 8 | 8 |
Last viewed
Cable ties with metal latch closure – industrial quality
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Cable ties with plastic latch, detectable – industrial quality
Double-curved hickory handle
Hexagonal nut
Hexagonal bolt with thread up to the head
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cable ties with plastic latch closure – industrial quality
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)