Interior trim clip, closed
Interior trim clip with closed anchor
INTRMCLIP-POM-BLUE-D8,2MM
Register now and access more than 20,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.20-8.30 mm |
Min./max. attachment thickness | 0.70-1.50 mm |
Head diameter (A) | 13.00 mm |
Length below head (B) | 15.10 mm |
Core diameter (C) | 4.50 mm |
Grip range head (D) | 2.90 mm |
Colour | Blue |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | BMW, MINI, Citroen, Peugeot |
Corresponds to original spare part number | 51139804996, 8337FC, 6991Z1 |
Installation location | Interior, Bodywork |
Type of vehicle | Passenger car |
Last viewed
Combination wrench, angled
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Hexagon head bolt with thread up to head DIN 933, 8.8 steel with silver zinc-flake coating (ZFSHL)
Interior trim clip, closed
Hexagon head serrated screw with flange 100 steel with silver zinc-flake coating (ZFSHL)
Clamping pin/clamping sleeve ISO 8752, spring steel with silver zinc-flake coating
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
PZ AL 130/AL 30 lever/handle set
Hexagon nut with clamping piece (all-metal) DIN 980, zinc plated 10 steel with thick-layer passivation (VZD)
Plastic threaded plug W.TEC® WP 700 cover cap