Interior trim clip, opened
Interior trim clip with open anchor
INTRMCLIP-PSA-CITR/PEUG-TRANSP
Register now and access more than 20,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.2-8.2 mm |
Min./max. attachment thickness | 0.7-0.7 mm |
Head diameter (A) | 12 mm |
Length below head (B) | 15.7 mm |
Core diameter (C) | 5 mm |
Grip range head (D) | 2.8 mm |
Colour | White |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Universal |
Corresponds to original spare part number | 699050 |
Type of vehicle | Universal |
Last viewed
Brass spacer stud
PLT-76 E/TFE cable tie with plastic latch, heat stabilised, 170 °C, INDUSTRY
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Flat washer with chamfer for high-strength fittings
PH screwdriver with round shank
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain