Interior trim clip, type 2
Interior trim clip with open anchor
INTRMCLIP-MB-LIGHTGREEN
Register now and access more than 20,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Min./max. drill hole diameter | 8.00-8.20 mm |
Min./max. attachment thickness | 0.70-1.00 mm |
Head diameter (A) | 13.20 mm |
Core diameter (B) | 5.90 mm |
Width (C) | 17.60 mm |
Length below head (D) | 16.50 mm |
Grip range head (E) | 2.30 mm |
Colour | Green |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Mercedes-Benz |
Corresponds to original spare part number | A0079889978 |
Installation location | Bodywork |
Type of vehicle | Universal |
Last viewed
Tool head, small design For crimping pliers
Contact spray SW
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Cable tie tightening pliers Ergonomic
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Plain washers - large series ISO 7093-1 A4 stainless steel 200 HV plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain