Interior trim clip with half-round head suitable for oval holes
Interior trim clip with half-round head
INTRMCLIP-HONDA-PLUG-PLA-WHITE
Register now and access more than 20,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
 | |
Min./max. drill hole diameter | 8.50-8.50 mm |
Min./max. attachment thickness | 2.00-2.00 mm |
Head diameter (A) | 18.50 mm |
Length below head (B) | 13.50 mm |
Core diameter (C) | 10.00 mm |
Grip range head (D) | 2.40 mm |
Colour | Neutral |
Material | PA 66 - Polyamide |
Suitable for vehicle manufacturer | Honda |
Corresponds to original spare part number | 38993634810 |
Installation location | Universal |
Type of vehicle | Passenger car |
Last viewed
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Tungsten carbide bur with MX teeth
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head
Chin strap, 4-point for SH 2000 and SH 3000 safety helmets
Twist drill bit HSCo DIN 338 type RN oxide
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain