Joint chisel flat oval
Joint chisel
HNDCHIS-JNT-HDS
Register now and access more than 20,000 products
Chromium-vanadium air hardening steel
Hardened safety hammer head
Prevents hammer head from developing bulges or splintering.
Full length of shaft hardened
Particularly tough and wear-resistant as a result.
Regrindable blade
Oil-resistant PVC handles
Prevents hand injuries due to slippage when striking.
Rebound impacts
Absorbed by the handle and not transferred to the hand.
Octagonal handle
Prevents tools rolling away, e.g. on scaffolding.
Datasheets(X)
Length | 250 mm |
Striking-surface width | 13 mm |
Striking-surface length x width1 | 26 x 13 mm |
Cutting edge width | 50 mm |
Last viewed
Adhesive base for cable ties 12.7x12.7 mm – industrial quality
Plastic blind rivet, type 1
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Silicone spray
Small spirit level with magnet
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Electronic side cutters, round head
Twist drill bit HSS DIN 338 TYPE RN