Jump starter, 12-V Li-ion, Booster Light
Jump starter 12V Li-Ion Booster Light
JUMPSTRT-(LIIONBOOSTER-LIGHT)-12V
Register now and access more than 20,000 products
Quality in a compact design
- Use of high-quality materials and components.
- Good performance values thanks to high-quality Li-ion battery, robust cables and clamps.
- Handy format thanks to the Li-ion technology and well-thought-out design.
User-friendly and multifunctional
- Very simple to operate – connect, switch on, start.
- LED display for checking the charge status of the internal battery.
- Charging via USB possible using a socket or cigarette lighter connector.
- Can be used as a power bank thanks to USB output
- 7-mode LED light
Safe and reliable
- Protected against polarity reversal, sparks, overcharging, overvoltage and overheating.
- Compliance with all relevant standards
Scope of delivery
- Li-ion Booster Light
- USB cable
- Adapter 230 V USB socket
- 12 V USB cigarette lighter adapter
- User handbook
- Storage bag
The device must only be operated by qualified authorised persons. All persons involved with commissioning, operation, and maintenance of the device must be suitably qualified.
The override mode must be used with extreme caution and only in exceptional cases as spark and reverse polarity protection are switched off!
Vehicles with diesel/petrol engines and 12 V electrical system.
1. Switch off the vehicle and remove the ignition key.
2. Connect the switched-off and fully charged jump starter.
3. First connect the red plus terminal to the positive battery terminal, then the black minus terminal to an earth point on the vehicle.
4. Switch on the jump starter and start the vehicle.
5. If necessary switch on override mode, if the vehicle battery is deeply discharged or the jump starter power is not sufficient.
5. Switch off the starter, then first remove the minus terminal followed by the plus terminal.
6. Recharge jump starter.
Suitable for max. cubic capacity | 1.6 l |
Rechargeable battery/battery capacity | 2150 mAh |
Max. current | 1000 A |
Nominal current | 300 A |
Width x height x depth | 183 x 43 x 85 mm |
Weight | 700 g |
Type of rechargeable battery/battery | Li-lon |
Rechargeable battery/battery permanently installed | Yes |
Number of rechargeable batteries/batteries | 1 PCS |
Material of housing | Plastic |
Colour | Grey, Black |
Type description | Li-ion Booster Light |
Display | LED |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cable ties with metal latch closure – industrial quality
Cable grommet TPE
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly