Jump starter, 12-V Li-ion, Booster Ultra
Jump starter 12V Li-Ion Booster Ultra
JUMPSTRT-(LIIONBOOSTER-ULTRA)-12V
Register now and access more than 20,000 products
Quality and performance in a compact design
- Use of high-quality materials and components.
- Excellent performance values thanks to high-quality Li-ion battery, thick cables and solid clamps.
- Override mode for the extra power boost.
- Easily transportable thanks to compact design in the storage case.
User-friendly and multi-functional
- Very simple to operate – connect, switch on, start.
- LED display for checking the charge status of the internal battery.
- Charging via USB possible using a socket or cigarette lighter connector.
- Can be used as a power bank thanks to USB output.
- 7-mode LED pocket torch.
Safe and reliable
- Protected against polarity reversal, sparks, overcharging, overvoltage and overheating.
- Compliance with all relevant standards.
Scope of delivery
- Li-ion, Booster Ultra
- Charger, 230 V
- USB cable
- 12 V USB cigarette lighter adapter
- User handbook
- Storage case
The device must only be operated by qualified authorised persons. All persons involved with commissioning, operation, and maintenance of the device must be suitably qualified.
The override mode must be used with extreme caution and only in exceptional cases as spark and reverse polarity protection are switched off!
Datasheets(X)
Vehicles with diesel/petrol engines and 12 V electrical system.
1. Switch off the vehicle and remove the ignition key.
2. Connect the switched-off and fully charged jump starter.
3. First connect the red plus terminal to the positive battery terminal, then the black minus terminal to an earth point on the vehicle.
4. Switch on the jump starter and start the vehicle.
5. If necessary switch on override mode, if the vehicle battery is deeply discharged or the jump starter power is not sufficient.
5. Switch off the starter, then first remove the minus terminal followed by the plus terminal.
6. Recharge jump starter.
Suitable for max. cubic capacity | 5 l |
Rechargeable battery/battery capacity | 8000 mAh |
Max. current | 4000 A |
Nominal current | 1000 A |
Width x height x depth | 360 x 71 x 191 mm |
Weight | 2800 g |
Type of rechargeable battery/battery | Li-lon |
Rechargeable battery/battery permanently installed | Yes |
Number of rechargeable batteries/batteries | 1 PCS |
Material of housing | Plastic |
Colour | Grey, Black |
Cable cross section | 21 mm² |
Type description | Li-ion, Booster Ultra |
Display | LED |
Last viewed
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Spot weld replacement rasp
Dispenser system
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)