Lock washer VS Spring steel, mechanically applied zinc coating
WSH-LOK-VS-(MZN)-16,0X10,5X1,40
Art.-no. 04939010
EAN 4038898376071
Register now and access more than 20,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Suitable for thread (imperial) | 3/8 inch |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 16 mm |
Height (h1) | 2.0 mm |
Thickness (s1) | 1.4 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Hexagon Socket Head Cap Screw ASME 18.3, 18-8 stainless steel, UNC (comparable with ISO metric thread)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Lance
GEFU® thread-rolling screw with flat head and hexalobular drive (Txplus), serrated
Cable tie PLT PA
Angled adapter for assembly foam
WIPE-N-SHINE squeegee
3/4 inch torque wrench with push-through ratchet
WÜPLAST® flanged pan head screw with Z cross recess WN 1411, steel 10.9, zinc plated, transparent passivated (A3K)
Washer with large outside diameter DIN 9021, A4 stainless steel, plain