Locking bolt without locking groove, with fine thread
A1 stainless steel, shape B, fine thread
INPL-MR-A1-B-M8X1X38,5
Register now and access more than 20,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Materiale | Stainless steel A1, 1.4305 |
Material of handle | PA - Polyamide |
Material of pin | Hardened stainless steel C1, 1.4034 |
Oberfläche | Plain |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | B without latching notch, with lock nut |
Thread type x nominal diameter x pitch (d1) | M8 x 1 |
Stud diameter (d2) | 4 mm |
Head diameter (dk) | 18 mm |
Længde (l1) | 38.5 mm |
Schaftlänge (ls) | 15 mm |
Thread length (lg) | 13 mm |
Højde (h1) | 4 mm |
Height of the nut (h2) | 6 mm |
Chamfer height (f1) | 1 mm |
Width across flats (SW1) | 10 mm |
Width across flats 2 (SW2) | 13 mm |
Spring force start (F1) | 6 N |
Spring force end (F2) | 12 N |
Product weight (per item) | 0.100 g |
Datasheets(X)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Twist drill bit HSS DIN 338 TYPE RN
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagon nut, low profile, with clamping piece (non-metal insert)
Cable ties with plastic latch closure - industrial quality
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Cable ties with metal latch closure – industrial quality
Hammer drill bit, Longlife Quadro-L with SDS-plus drill chuck