Metal frame anchor WUL8
Metal frame anchor, WUL8
ANC-(WU-L)-TX20-80-8X112
Register now and access more than 20,000 products
- The small head diameter is ideal for profiles with a narrow bottom rebate
- Fast, economical push-through installation
- Tension-free spaced installation
- Suitable for machine insertion using TX20 drive
- Captive die cast zinc cone
- Locking cam for hollow profiles and as an anti-rotation device
- Small drilling diameter, quick drilling in concrete
- Metal frame anchor for light loads
- Good fitness for purpose with concrete, solid brick masonry, natural stone surfaces
- Sleeve: Sheet steel, Al/Zn coating
- Screw: Steel, white zinc-plated
- Cone: Die cast zinc
Installation guidelines/RAL Quality Assurance Association:
The fixture must safely transfer all standard forces affecting the window to the structure. This means the total load must be calculated from the total of the window load, wind load and working load (see DIN 1055). The currently applicable building regulations stipulate that buildings and their components must be planned in such a way that they do not endanger human life and health or pose a risk to public safety. Attachment of the windows must also comply with this criterion. We recommend anchors 51, 52, 53 and 55 for this application.
Window walls in accordance with DIN 18056:
This standard applies to window walls with an area of at least 9 m² and a minimum side length of 200 cm, comprising a support structure (frame, jambs, crossbars) with fillings (e.g. glazing). This standard does not apply to walls made from glass blocks. We recommend anchors with construction product approval for this application.
Drill the hole
Install anchor
Tighten screw
Cover cap SIT
Datasheets(X)
Suitable for attaching window and door frames made of wood, plastic and aluminium
Especially suitable for use in solid surfaces
Plastic and aluminium profiles with narrow bottom rebate up to 13 mm in width
Anchor diameter | 8 mm |
Anchor length (l) (l) | 112 mm |
Drive type | Internal TX |
Hole diameter in component (d f) | 8.5 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h nom) | 30 mm |
Surface | Zinc plated |
Material | Steel |
Drill hole depth (h 1) | 35 mm |
DIN | 18056 |
Head type | Pan head |
Max. attachment height (t fix) | 80 mm |
Internal drive | TX20 |
| Performance data | |||
| Anchor diameter [mm] | 8 | ||
| Recommended tensile load | Concrete ≥ C20/25 | Frec. [kN] | 0,4 |
| Solid brick | 0,4 | ||
| Vertically perforated brick | Max. 0.15 depending on the shape and strength of the bricks | ||
| Hollow sand-lime brick | 0,3 | ||
| Aerated concrete | 0,1 | ||
| Recommended transverse load | Concrete ≥ C20/25 | Frec. [kN] | 0,3 |
| Solid brick | 0,3 | ||
| Vertically perforated brick | Max. 0.4 depending on the shape and strength of the bricks | ||
| Hollow sand-lime brick | 0,3 | ||
| Aerated concrete | 0,2 | ||
Characteristic values | ||
Minimum setting depth | hnom,min ≥ [mm] | 30 |
Drill hole depth | h1 ≥ [mm] | = depth of engagement + 5 mm |
Nominal drill bit diameter | d0 [mm] | 8 |
Hole diameter in component | df [mm] | 8,5 |
Screw diameter | dscr [mm] | 5 |
Tightening torque | Tinst [Nm] | 5 |
Last viewed
1C foam gun PURlogic® Xpress For professional application of 1-component gun foams
Screw-on fastening base
Twist drill bit HSCo DIN 338 MFD Speed
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Grus S1P safety shoe
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)
Crimping pliers For wire end ferrules
Twist drill bit HSS DIN 338 type RN 130°