Metric lock nut, brass, EMC, with knurl
Metric lock nut, brass, EMC, knurled
NUT-HEX-EMC-BRS-WS15-E2J-M12X1,5-KNURLD
Register now and access more than 20,000 products
- Knurled cutting edge
- For safe mounting of EMC cable glands
- Reliably cuts through the layers of paint or powder coating
- Allows optimum contact with potential equalisation
Datasheets(X)
Connection thread | M12 x 1.5 |
Thread length (metric thread) | 3 mm |
Width across flats | 15 mm |
Min./max. temperature conditions | -60 to 200 °C |
Material | Brass |
Surface | Nickel plated |
Min. temperature conditions | -60 °C |
Max. temperature conditions | 200 °C |
Last viewed
Square wedge-shaped washer DIN 6918, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on U-profile
Cable ties with plastic latch, heat-stabilised and weather-resistant – industrial quality
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Flat washer with chamfer for high-strength fittings
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Specially fused alumina sanding tip, pink
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Single wire seal (SEAL) For uninsulated cable connector
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6