PTFE thread-sealing tape
PTFE thread sealing tape
THRSEALTPE-PTFE-FRP-12MX12MMX0,1MM
Register now and access more than 20,000 products
Resistant to all aggressive media
Does not stick or swell
Therefore prevents seizing of the thread
Alignment of the thread connection, which includes limited turn-back, is permissible
Since the temperature and pressure are dependent on one another, it is not possible to allow both to be pushed to maximum levels simultaneously. In addition, the specifications depend on the respective medium. Therefore, these specifications can only serve as a guideline due to the variety of application options (see also DVGW approval).
Datasheets(X)
Material | Polytetrafluoroethylene |
Coating weight per m² | 60 g |
Thickness | 0.1 mm |
Width | 12 mm |
Length | 12 m |
Approval mark | DVGW |
Suitable for | Fine thread max. nominal diameter 10 |
Min./max. temperature resistance | -240 to 240 °C |
Max. pressure | 25 bar |
Silicone-free | Yes |
Free of lead (< 0.1 %) | Yes |
Free of tin (< 0.1 %) | Yes |
SVHC according to REACH < 0.1 % | Yes |
Free of chlorinated paraffins (< 0.1 %) | Yes |
Solvent free (< 1 %) | Yes |
Free of hydrocarbon plasticizers (< 0.1 %) | Yes |
Free of halogenated blowing agents (< 0.1 %) | Yes |
Free of hexabromocyclododecane (< 0.1 %) | Yes |
Free of scrap tyre granules | Yes |
Last viewed
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Metric double box-end wrench with POWERDRIV®
Double box-end wrench
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Hexagonal bolt with thread up to the head
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
System case 8.4.1
TIME-SERT® screw-in tool
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel