PU Straight compressed-air spiral hose set 1500 series
PU-pneumatic hose set series 1500
PNHOSE-KIT-SR-S1500-ID11MM-L10M-3PCS
Register now and access more than 20,000 products
High flow capacity
- Coupling allows a 1,500 litres/minute flow (53 cubic feet/minute).
- The smooth inner wall of the hose avoids resistance to air and allow a high airflow.
High safety factor for user
Maximum operating pressure of 16 bar (232 psi).
Sturdy and long-lasting
- Outer coating: high resistance to UV rays and, above all, to oil, solvents and other non-aqueous solutions.
- Inner structure: Robust reinforcing mesh.
Greater comfort during work
One-handed operation: The straight end simplifies work (quicker coupling).
Better cost x benefit
Lighter, more flexible and more resistant to torsion than PVC hoses.
- Always be aware of the maximum working pressure of the hose. Using hoses not suitable for compressed air can cause accidents. We recommend a minimum working pressure of 300 psi.
- The recommended working pressure for pneumatic tools is 90 psi.
- The use of a filter regulator is important in order to remove possible contaminants from the compressed air stream as well maintains the correct pressure levels.
Datasheets(X)
Professional use in mechanical and tyre workshops, body repair workshops, metalworking and carpentry.
Max. operating pressure | 10 bar |
Inner hose diameter | 11 mm |
Outer diameter of hose | 16 mm |
Length | 10 m |
Number of pieces in assortment/set | 3 PCS |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Segmented construction site diamond cutting disc
Pan head screw with recessed head H DIN 7985, zinc plated 4.8 steel with thick-layer passivation (VZD), PH drive
Ducting clamp Part 3 – Double series
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Twist drill bit HSS DIN 338 TYPE RN
Pine tree clip with rough pine tree shape
Cable grommet CR
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6