Packfix packing film
Packaging film, Packfix
PCKFOIL-BLACK-20MY-500MMX270M
Register now and access more than 20,000 products
- When removing film from the product, no adhesive residues are left behind
- Corners, edges and curves etc. can also be packaged and/or protected quickly and reliably with the film. This also means considerable time is saved.
- The film can easily be torn off by dragging on the protruding section of the winding core. As a result, no extra cutting tools are required to cut the film.
- Recyclable PE film
A different handle must be used for the 500 mm film than for the 100 mm film.
Datasheets(X)
For packing, bundling, protecting, securing, safeguarding load units and as moisture and theft protection. Universal usage for a wide variety of packaging goods such as packages, pallets, wood and plastic profiles, carpet rolls, picture frames, other long goods etc. Packfix has also proven its worth in relocation applications such as for sealing cartons, protecting furniture pieces and securing drawers against opening. Packfix 100 mm is also particularly suitable for steering wheel protection in the automotive industry
Please refer to the technical data sheet for information on correct application.
When securing pallets with Packfix for load units, it is essential to pay attention to the foot windings. A good connection between the load carrier and packing material is essential for good load unit securing.
Material | PE - Polyethylene |
Colour | Black |
Width | 500 mm |
Length | 270 m |
Foil thickness | 20 µm |
Stretch capacity | 200 % |
Min. pressing pressure | 0.7 N/mm² |
Conditions for pressing pressure | with eight wrappings |
Ultraviolet resistance | 6 months |
Max. temperature resistance | 50 °C |
Chemical resistance | Application-dependent, query required |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
3/8-inch socket wrench For TX screws, short
1/4 inch socket wrench insert, metric short
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
1/4" socket wrench insert metric, long
Screw-on flame-retardant base for cable ties, 25.4x25.4 mm - industrial quality
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Maintenance set for automatic halogen leak detectors
truss head screw with H cross recess