Paint spray gun polyester filler gun AP P For highly viscous materials for filling
Paint spray gun AP P for polyester filler
PNTSPRGUN-POLYESTERFILLER-(AP-P)
Register now and access more than 20,000 products
- Gun for polyester spray filler
- Integrated material quantity control, stepless round/wide jet control
- Low air consumption at low spray pressure
- Self-adjusting air and material seal
- Special jet for reducing covering and sanding work
- Input pressure: 2.0–3.0 bar
- Air required: 200 l/min
- Spraying distance: 18 - 23 cm
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
For low-mist processing of high-viscosity thick film fillers, such as polyester fillers, 2C thick film fillers, synthetic resin fillers or spray fillers.
Contents | 600 ml |
Product weight (per item) | 725.000 g |
Included in delivery | Paint gun complete with 600 ml plastic cup, connecting nipple, tool set and 2.5 mm nozzle |
Colour | Grey |
Material | Plastic / metal |
Min. operating pressure | 2 bar |
Max. operating pressure | 3 bar |
Operating pressure | 2.5 bar |
Air consumption | 200 l/min |
Min. spraying distance | 18 cm |
Max. spraying distance | 23 cm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Union nipple
Grus S1P safety shoe
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Adhesive base for cable ties, 19x19 mm – industrial quality