Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
DIN 7983 steel zinc plated H shape C with tip
SCR-RSDCS-DIN7983-C-H2-(A2K)-4,2X22
Register now and access more than 20,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = Thread without tip
Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 4.2 mm |
Head diameter (dk) | 8.1 mm |
Length (l1) | 22 mm |
Head height (k1) | 2.5 mm |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
Last viewed
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Spacer washer
Twist drill bit HSS DIN 338 TYPE RN
JIS B1111 steel 4T zinc plated H
Washing brush, 150 x 250 mm
Hydraulic crimping tool, WHK 60/22 For half-shell crimping inserts, width 22 mm
Circlip shaft shape AV
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Centre drill HSS