Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
DIN 7983 steel zinc plated H shape C with tip
SCR-RSDCS-DIN7983-C-H2-(A2K)-4,8X25
Register now and access more than 20,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = Thread without tip
Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 4.8 mm |
Head diameter (dk) | 9.5 mm |
Length (l1) | 25 mm |
Head height (k1) | 3 mm |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
Last viewed
1/4 inch socket wrench insert, metric short
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Ring-shaped crimp cable lug DIN 46234 and similar
C 6.3 PH bit (1/4 inch)
Cutting wheel For pipe cutter
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Twist drill bit HSS DIN 338 TYPE RN
Screw-on fastening base – flame-retardant/-V0