Pan head tapping screw, shape F with recessed head DIN 7981, steel, nickel-plated (E2J), round head, PH drive, shape F
DIN 7981 steel nickel-plated round head H shape F
SCR-PANHD-DIN7981-F-H2-(E2J)-4,2X9,5
Register now and access more than 20,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
 | |
Material | Steel |
Surface | Nickel plated |
Form | F |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 9.5 mm |
Head diameter (dk) | 8.2 mm |
Head height (k1) | 3.05 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Datasheets(X)
Last viewed
Dispenser system
Cable ties with plastic latch closure - industrial quality
Locking disc spring washer, shape B Spring steel hardened 420-510 HV10, zinc-flake coated
Self-tapping thread inserts with cutting hole
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Screw plug W.TEC® COVER CAP WP 700 For metric threads
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated
Twist drill bit HSCo DIN 338 type RN oxide