Particle board screw Wüpofast ® 2.0
WÜPOFAST 2.0 steel zinc plated yellow FT cs head Z
SCR-CS-WO-RT-Z2-(A2L)-4,5X25/19
Register now and access more than 20,000 products
The screw that bites
Flat countersunk head
- Suitable for use on wood and hardware
- Screws into hardware without damaging the coating
Reamer (measurements 5 x 70 mm)
- Reduces friction during screw-in by 40%
- Less stress on electrical tools (longer service life)
Fine pitch/coarse pitch thread
- Fine pitch thread on small screws for better grip on particle board
- Coarse pitch thread for faster screw-in
Reamer incorporated in the thread
- Less effort required during screw-in thanks to the reduction in friction
- Reduces cracking
Needle tip
- Allows optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good insertion/centring
- Good adhesion
- Improved drive precision
Datasheets(X)
 | |
Nominal diameter (d) | 4.5 mm |
Length (l) | 25 mm |
Head type | Countersunk head |
Head diameter (dh) | 8.8 mm |
Head height (k) | 2.7 mm |
Internal drive | Z2 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Thread length (lg) | 21 mm |
Core diameter | 2.7 mm |
Shape of tip | Pinpoint |
Angle of the tip | 23 Degree |
Material | Hardened steel |
Surface | Zinc plated yellow |
Product weight (per item) | 1.820 g |
Area of application | Fitting, Interior fitting, Body, Furniture, Universal |
Screw requiring approval | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Ring-shaped crimp cable lug DIN 46234 and similar
Pipe cable lug with inspection hole
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)