Welcome to Wuerth Industrial Services Malaysia For trade customers only

Exclusively for business customers

Service-hotline +603 8021 0200

Purchase on account

more than 30,000 products

Wuerth App

Perfect zinc spray - ZNSPR-LIGHT-PERFECT-400ML Perfect zinc spray - ZNSPR-LIGHT-PERFECT-400ML
Perfect zinc spray - ZNSPR-LIGHT-PERFECT-400ML - 1
Perfect zinc spray - ZNSPR-LIGHT-PERFECT-400ML - 2

Perfect zinc spray

Metal surface, zinc spray perfect
ZNSPR-LIGHT-PERFECT-400ML

Art.-no. 0893114114
EAN 4065233124127
All versions

Prices for customers after login
Perfect zinc spray

Art.-no. 0893114114

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 20,000 products

Outstanding long-term protection and optimum metal surface appearance

High layer thickness in first spray pass


  • High degree of safety thanks to optimum weathering protection

  • Minimum amount of time spent, as only one operation is required

  • Good coverage


Versatile use with adjustable spray head


Large area and minor repairs can be carried out quickly and reliably with the variable spray head.



High degree of resistance to running



High degree of wear resistance



Tested corrosion protection in accordance with DIN


  • Perfect zinc spray, light: 250 hours

  • Perfect zinc spray: 500 hours

  • Can be used for repairs in accordance with DIN EN ISO 1461


Spot weldable

Notice

Perfect zinc spray and Perfect light zinc spray contain zinc, and therefore offer optimum, active cathodic protection against corrosion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust. The remaining products protect the entire surface against rust. If the surface is damaged, the metal is no longer protected.


Not suitable as adhesive base for PU, MS polymer or hybrid sealing compounds.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Chemical Products are restricted and it is not allowed to deliver this item outside Malaysia

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For visual enhancement, repair and protection against corrosion of metallic surfaces.

Instructions

The application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake can vigorously for at least 2 minutes before use.

Contents

400 ml

Chemical basis

Modified alkyd resin

Colour

Zinc, bright

Gloss level

Glossy

Min. curing time

10 h

Fully hardening/curing conditions

At recommended dry layer thickness

Max. curing time

12 h

Resistance in salt-spray test

250 h

Max. temperature resistance

240 °C

Dust-drying time

15 min

Dry layer thickness (first back-and-forth motion)

40 µm

Conditions for dust-drying time

at recommended dry layer thickness

Purity rating zinc

99.99 %

Zinc content in the dry film

43 %

Coating thickness

40 µm

Recoatable/Can be painted over

Conditional, preliminary testing required

Grip strength conditions

at recommended dry layer thickness

Substrates with good adhesion

Ferrous metals
PMMA
Polycarbonate
Polystyrene
Zinc plated surfaces

Spot weldable

Yes

AOX-free

Yes

Cross-cut test

MAN 0-1

Min./max. grip strength

15-20 min

Cross-cut test conditions

in accordance with DIN 53151

Conditions for resistance in salt-spray test

in accordance with DIN 50021

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 10°C to 25°C

Min. flashing point

-42 °C

Suitable glove:
 
Product
Description
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 1
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 2
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Spare parts for this product:
Replacement spray head Variator for RAPID 2-component primer filler
Replacement spray head Variator for RAPID 2-component primer filler

SPRHD-F.PNTSPR-VARIATOR

x 6 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details