Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-6SMM
Register now and access more than 20,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 6 mm² |
Flange hole | M12 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 28 mm |
Sleeve length (a) | 9.5 mm |
Width (b) | 19 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Pipe cable lug with inspection hole
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Twist drill bit HSS DIN 338 type RN 130°
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Twist drill bit HSCo DIN 338 MFD Speed
Assembly glove Soft