Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M8-95SMM
Register now and access more than 20,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 95 mm² |
Flange hole | M8 |
Wire diameter (d1) | 13.5 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 48 mm |
Sleeve length (a) | 25 mm |
Width (b) | 26 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
WNA 200 ear defenders With very good noise insulation properties and height-adjustable headband
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Twist drill bit HSCo DIN 338 MFD Speed
Hexagon nut, low profile, with clamping piece (non-metal insert)
Cable ties with plastic latch closure – industrial quality
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel