Pipe cable lug flex
Tubular cable lug for fine-stranded conductors
TUBCBLLUG-FINESTR-M12-95SMM
Register now and access more than 20,000 products
- Widened sleeve for easy cable routing
- For fine-stranded conductors from CU-ETP in accordance with EN 13600
- Electro-tin plated, with inspection hole
- Heat resistant up to +125°C
Datasheets(X)
Wire cross section | 95 mm² |
Flange hole | M12 |
Wire diameter (d1) | 14.5 mm |
Diameter of hole (d2) | 13 mm |
Distance between sleeve end and centre of hole (e) | 53 mm |
Sleeve length (a) | 26 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Copper |
Surface | Tin plated |
Last viewed
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
Brass spacer stud
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Cable ties with plastic latch closure – industrial quality
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Flat washer with chamfer ISO 7090, steel, 300 HV, zinc flake, silver (ZFSH)
Blind rivet, flat head