Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M16-150SMM
Register now and access more than 20,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-wire round conductors, such as compliant with DIN EN 60228 Class 2
for round-pressed sector cables
Wire cross section | 150 mm² |
Flange hole | M16 |
Wire diameter (d1) | 16.5 mm |
Diameter of hole (d2) | 17 mm |
Distance between sleeve end and centre of hole (e) | 58 mm |
Sleeve length (a) | 30 mm |
Width (b) | 31 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!