Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M4-1,2SMM
Register now and access more than 20,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 1.2 mm² |
Flange hole | M4 |
Wire diameter (d1) | 1.4 mm |
Diameter of hole (d2) | 4.3 mm |
Distance between sleeve end and centre of hole (e) | 15.5 mm |
Sleeve length (a) | 7.1 mm |
Width (b) | 7.5 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cable ties with plastic latch closure – industrial quality
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Cable ties with metal latch closure – industrial quality
Twist drill bit HSS DIN 338 type RN 130°
Flat connector contact MCP 2.8
Hexagonal bolt with thread up to the head
Twist drill bits HSS DIN 338 type RN TIN head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)