Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPCLMP-RSGU-RBR-W5/A4-15/15
Register now and access more than 20,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Bredde (B) | 15 mm |
Nominal diameter (D) | 15 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 18.7 mm |
Standards | DIN 3016 |
Materiale | Stainless steel A4 |
Oberfläche | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Datasheets(X)
Last viewed
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Square wedge-shaped washer DIN 435, zinc-plated steel, for I-section
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Slotted cheese head DIN 84, A2 stainless steel, plain
Screw-on fastening base
Standard manual cartridge gun
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Centre drill HSS