Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Polyester coils, wound
CBLPULSPRL-PES-BOX-D5,3MM-20M
Register now and access more than 20,000 products
With two-sided Powerglider for the narrowest of radii for laying cables
- Even masters radii and narrow areas that conventional pulling coils cannot.
- Increased penetration power with considerably less applied force
- Special head for pushing in the coil and pulling the cable
- No change of head required
- Large metal eyelet for simple cable hold
Polyester coil
- Coil does not break or tear – no time-consuming repairs necessary
- 50% less friction than conventional cable feed coils
- Considerably easier to use than fibre glass or plastic coils
- Greater pulling forces than fibre glass or plastic coils
Not suitable for use in conjunction with CPS 1 cable feed device.
Length | 20 m |
Design | With dispenser |
Diameter (Ø) | 5.3 mm |
Tensile load | 300 kg |
Material | PES - Polyester |
Colour | Black |
Datasheets(X)
Last viewed
Cable ties with plastic latch, detectable – industrial quality
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Cable ties with metal latch closure, heat-stabilised – industrial quality
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Twist drill bit HSS DIN 338 TYPE RN
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Twist drill bit HSS DIN 338 type RN 130°