Protective glove CUT 3/200 with Kevlar®.
Cut-resistant glove CUT 3/200
CUTRESGLOV-CUT3/200-SZ10
Register now and access more than 20,000 products
- Seamless base material with fine stitching, 100% Kevlar®.
- Good grip thanks to latex coating in the palm and finger areas, including the thumbs
- Backs of hands open for good ventilation
- High cut and abrasion resistance
Kevlar® is a registered trademark owned by DuPont
Datasheets(X)
Glass industry, material recycling, metal stamping and processing plants, plastics industry, paper industry
Size | 10 |
Gauge | 10 |
Material of liner | Kevlar® seamless knitted |
Material of coating | Natural rubber lamination |
Standards | EN 388, EN 420 |
Category | II |
Last viewed
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Pipe cable lug with inspection hole
Half-shell trapezoidal crimping insert
Insulated flat plug-in sleeve PVC DIN46245 T1-3
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with threading up to head ISO 4017, steel, strength class 8.8, zinc flake, silver (ZFSHL)
Hexagon bolt with threading up to head ISO 4017, steel, strength class 8.8, zinc flake, silver (ZFSHL)
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain