Protective glove MultiFit Nitrile
Protective glove Multifit Nitrile
PROTGLOV-SPEC-MULTIFIT-NITRILE-SZ12
Register now and access more than 20,000 products
- Very resistant to wear
- High resistance to many greases and oils in small amounts
- Good grip in dry and slightly damp environments thanks to the microporous foamed nitrile coating on the palm
- High wearing comfort thanks to the seamless polyamide-elastane base fabric and the breathable nitrile foam coating
- Very good skin compatibility through Oeko-Tex® Standard 100
- Touchscreen-compatible
Our products with the seal Ökotex Standard 100 are environmentally compatible. The seal aims to reduce pollutants in products. Fabrics bearing this label have been tested for pollutants, meaning that the product does not pose a health risk.
Oeko-Tex® is a registered trademark of the research institute Hohenstein Prof. Dr Jürgen Mecheels GmbH & Co. KG, 74357 Bönnigheim, Germany.
Datasheets(X)
- Assembly, workshop work and mechanic's tasks
- Packaging and warehouse work
- Repair and maintenance work
Size | 12 |
Gauge | 15 |
Material of liner | Polyamide/elastane |
Material of coating | Nitrile foam |
Standards | ISO 21420:2020, EN 388:2016+A1:2018, EN 407:2020 |
Category | II |
Last viewed
Adhesive base for cable ties 12.7x12.7 mm – industrial quality
Twist drill bit HSCo DIN 338 MFD Speed
Chemical injection mortar Basic WIT-PM 200
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Ring-shaped crimp cable lug DIN 46234 and similar
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Body sealing plugs assortment 450 pieces in system case
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Twist drill bit HSCo DIN 338 MFD Speed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel