Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS10MM
ZEBRA
Register now and access more than 20,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 10 mm |
Length (L) | 159 mm |
Possible uses, 6-sided/12-sided metric | 10 mm |
Thickness of jaw (a1) | 5.3 mm |
Ring thickness (a2) | 7.3 mm |
Width of jaws (outside) (b1) | 20.5 mm |
External diameter of ring (d) | 20 mm |
Max. torque (F max.) | 59 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Screw-on fastening base
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
CUT+COOL Perfect drilling and cutting oil
Tungsten carbide bur with MX teeth
Straight edge blade For polystyrene
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Curved piece For Standard clamping element
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexalobular-type cheese head screw, low head