Reinforced clamping lever with female thread
Clamping lever, steel, female thread, reinforced
CLMPLEVR-IT-ST-RFCD-M6X49
Register now and access more than 20,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Burnished |
RoHS-compliant | Yes |
Design | Strengthened design |
Thread type x nominal diameter (d1) | M6 |
Shank diameter (d2) | 10 mm |
Head diameter (dk) | 14 mm |
Length of lever (l1) | 49 mm |
Height (h1) | 33.5 mm |
Head height (k) | 24.5 mm |
Radius (r1) | 42 mm |
Colour | Black |
Product weight (per item) | 16.300 g |
Thread type | Metric thread |
Last viewed
Finger bandage
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Universal holder E 6.3 (1/4") With adjustable length of thread engagement and permanent magnet
HSCo green-ring machine tap for blind holes DIN 371/376
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Screw seal, self-centring
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
VDE junction box WFK 2 With self-sealing, soft membrane entry points
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)