Ring-shaped crimp cable lug DIN 46234 and similar
Crimp cable lug
CRMPCBLUG-46234-CU-(J2N)-M10-185,0SMM
Register now and access more than 20,000 products
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
CAD data (available after login)
For multi-wire, fine-wire and very fine wire copper conductors, such as compliant with DIN EN 60228 Class 2, 5 and 6
 | |
Wire cross section | 185 mm² |
Flange hole | M10 |
Nominal size | 10 - 185 |
Wire diameter (d1) | 21 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l) | 50 mm |
Sleeve length | 28 mm |
Width (b) | 36 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
Twist drill bit HSS DIN 338 TYPE RN
Pipe and fastening clamp Multifix
Cable ties with plastic latch closure – industrial quality
ORSY®BULL drawer box series 5
Wurth Cable Tie Package Automotive/Metal
Electrical insulating tape
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality
Mechanical manual crimping pliers WK 22 For replaceable half-shell crimping inserts, width 22 mm
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel