Round LED warning lamp
LED flashing warning lamp, round
LGHT-HAZARDFLASH-BTRY-108X111MM
Art.-no. 0827559000
EAN 4050641674449
Register now and access more than 20,000 products
9 different operating modes
- Rotating, fast flashing, single flashing, alternating flashing, SOS signal, bright continuous light, soft continuous light, 2 LED flashing light, 4 LED flashing light, off
- To switch off the lamp without switching through all 9 menu items: Press and hold the on/off button for 2 seconds. 2 LEDs flash 5 times and the lamp switches off. When the lamp is switched on again, it remembers the last mode used.
Using the magnet on the back: The LED warning lamp can be attached to metal surfaces.
To charge the LED warning lamp, place it on the magnetic mount (observe correct polarity).
The LED warning lamp is not approved for ECE R65.
Do not make any alterations to the device. If the warning lamp is incorrectly assembled, this can affect its watertightness and damage the device.
Datasheets(X)
Depending on the application, it can be used horizontally, upright or suspended, e.g. on roads, at construction sites or in other areas where emergency signals need to be displayed.
Power rating | 2.6 W |
Battery designation | Li-Ion |
Number of rechargeable batteries/batteries | 1 PCS |
Length x width x height | 105 x 35 x 35 mm |
Last viewed
1-ear clamp assortment 481 pieces in system case
MIG welding wire
Dispenser system
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Comfort breathing mask - folded 3M Aura 9300+
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain