Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
DIN 603 steel 8.8, zinc plated
SCR-MHD-DIN603-8.8-(A2K)-M12X65
Register now and access more than 20,000 products
The flat square neck fixes the round head screw e.g. in a slot and allows tightening from the nut side without counter-tensioning.
Datasheets(X)
CAD data (available after login)
Use in timber construction, especially carpentry, pre-fabricated housing, vehicle construction (e.g. truck load platforms), boat building, trade fair construction, scaffolding, for heavy, separable transport racks or machines crates, transport crates for sea transport. Used to join wooden parts or wood and metal parts. The square neck is sunk into the wood. Bore diameter is dependent on thread dimension. For joining wood to wood, a larger washer must be placed under the nut, e.g. a wood construction washer.
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 65 mm |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Head diameter (dk) | 30.65 mm |
Head height (k1) | 6.95 mm |
Square width (V) | 12.7 mm |
Square height (f) | 8.75 mm |
Internal drive | 0 - not applicable |
Standards | DIN 603 |
RoHS-compliant | Yes |
Design | 0 - not applicable |
Head type | Cup head square neck |
Head details | With square neck |
Drive type | 0 - not applicable |
Thread type | Metric thread |
Pitch | 1.75 mm |
Thread form | Standard metric thread |
Shank diameter | 12 mm |
Thread length (metric thread) (b) | 30 mm |
Product class | C |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Last viewed
High-temperature lubricant paste HSP 1400
Cable ties with plastic latch, detectable – industrial quality
Twist drill bit HSS DIN 338 type RN 130°
Plain washers - large series ISO 7093-1 A4 stainless steel 200 HV plain
Handymax application gun, 585 ml
PU foam cleaner PURlogic® Clean
Natural rubber wrapping tape anthracite For FLEXEN® rubber foam refrigeration insulation
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Wood screw, DIN 96 Half moon head with slot
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain