SL locking device
SL locking device steel phosphated
LOK-SL-ESN08-(PHR)-D16,0MM
Register now and access more than 20,000 products
- Shaft locking device that can be installed and uninstalled radially without tools
- Spring-loaded arms for compensation of length tolerances
- Axial pretensioning for rattle-free fit
- Double locking to prevent accidental removal
- High axial load capacity
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts (d2) | 16 mm |
Suitable for groove diameter (d3) | 12 mm |
Suitable for groove width (m1) | 1.35 mm |
Internal diameter (d1) | 10.2 mm |
Width (b1) | 28 mm |
Height (h1) | 34 mm |
Material | Steel |
Surface | Phosphated |
Form | ESN08 |
RoHS-compliant | Yes |
Last viewed
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance h8
Single wire seal (SEAL) For uninsulated cable connector
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
JIS B1111 steel 4T zinc plated H
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Lock washer DIN 127, steel, mechanically applied zinc coating
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality