Screw, cylinder head w. hex-lobular driv
SCR-CYL-ISO14579-A2/70-TX20-M4X100
Art.-no. 40274 100
EAN 4065233081673
Register now and access more than 20,000 products
Datasheets(X)
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 100 mm |
Head diameter (dk) | 7 mm |
Head height (k1) | 4 mm |
Standards | ISO 14579 |
Material | Stainless steel A2 |
Property class | 70 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Socket head |
Drive type | Internal hexalobular |
Internal drive | TX20 |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) | 20 mm |
Product class | A |
Tightening torque 90% yield strength (1) | 2.4 Nm |
Min./max. resulting pre-load force (2) | 1.5-3 kN |
Corrosion resistance class (3) | CRC II |
Disc with hardness to be used | ≥ 200 HV |
Nut to be used with strength class | ≥ 70 |
Last viewed
Flat washer with large external diameter ISO 7093-1 A4 stainless steel 200 HV plain
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Universal holder E 6.3 (1/4") with quick-change chuck
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Nylon abrasive Very Fine A
Fillet weld brush
Automatic self-adjusting wire stripping pliers
Ribbed nuts W-0273, steel 10, plain
Washer with large outside diameter DIN 9021, A4 stainless steel, plain
Hot glue gun HKP 300-E