Screw with flattened half round head and collar with hexagon socket
DIN 34805-2 st 010.9 zinc flake silver TX
SCR-DIN34805/2-010.9-TX50-(ZFSHL)-M10X35
Register now and access more than 20,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M10 |
Length (l1) | 35 mm |
Head diameter (dc) | 16.7 mm |
Head height (k1) | 5.5 mm |
Internal drive | TX50 |
Standards | DIN 34805-2 |
Material | Steel |
Property class | 010.9 |
Surface | Flake zinc silver |
Head type | Button head with collar |
Drive type | Internal hexalobular |
Thread type | Metric thread |
Product class | A |
RoHS-compliant | Yes |
Last viewed
WÜPLAST® pan head screw with flange and hexagon socket WN1451, A2 stainless steel
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Cone grease nipple DIN 71412, shape A, straight, zinc plated steel, inch
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Feather key, high profile DIN 6885, A4 stainless steel, plain, shape A
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Electrical insulating tape
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Flat washer with chamfer for high-strength fittings
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel