Screw with flattened half round head with hexagon socket, imperial ASME B18.3, plain steel alloy, low head, UNC (comparable with ISO metric thread)
ASME B18.3 steel alloy plain UNC
SCR-BUT-SOC-ALLOY-(PL)-3/8_16X3/4
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
The "alloy" strength class is comparable with the metric strength class 12.9
The hexagon socket screws according to ASME B 18.3 have no strength class designation on the head as they only have one strength class according to the ASTM F835 mechanical properties.
Screws only suitable for limited loading, see also ASME 18.3 Table 3 and ASTM F835 Table 3 Point A
Datasheets(X)
 | |
Nominal diameter | 3/8 in |
Length | 0.75 in |
Head diameter | 0.656 in |
Head height | 0.199 in |
Internal drive | HS7/32 inch |
Material | Steel |
Surface | Plain |
Number of thread starts per inch | 16 |
Last viewed
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Adhesive base for cable ties, screw-on 28.6x28.6 mm – industrial quality
Wire end ferrule with plastic sleeve