Self-tapping thread insert
Self-tapping thread insert zinc plated yellow
THRINRT-SLFCUT-(A2C)-M8
Register now and access more than 20,000 products
- For creating heavy-duty screw connections and other threaded connections in low-strength materials, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- Cutting effect generated by sharp edges and interrupted external thread turns
- Front thread turns are angled for easier cutting and insertion
 | |
Material | Steel, case-hardened |
Surface | Zinc plated yellow |
Thread type x nominal diameter (d) | M8 |
Length (L) | 15 mm |
Outer diameter x pitch (D) | 12 x 1.5 mm |
Min./max. drill hole diameter | 10.7-11.4 mm |
Number of pieces in assortment/set | 12 PCS |
Datasheets(X)
Last viewed
Split pin ISO/WN 1234 steel zinc-plated
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
Centre drill HSS
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-plated, transparent passivated (A3K)
Silicone spray