Self-tapping thread insert
Self-tapping thread insert zinc plated yellow
THRINRT-SLFCUT-(A2C)-M8
Register now and access more than 20,000 products
- For creating heavy-duty screw connections and other threaded connections in low-strength materials, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- Cutting effect generated by sharp edges and interrupted external thread turns
- Front thread turns are angled for easier cutting and insertion
Datasheets(X)
 | |
Material | Steel, case-hardened |
Surface | Zinc plated yellow |
Thread type x nominal diameter (d) | M8 |
Length (L) | 15 mm |
Outer diameter x pitch (D) | 12 x 1.5 mm |
Min./max. drill hole diameter | 10.7-11.4 mm |
Number of pieces in assortment/set | 12 PCS |
Last viewed
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Universal thread file For UNF thread (NF) and UNC thread (NC)
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)
Screw-on fastening base
Twist Drill bits HSS ASME B94.11M TYPE RN