Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Screw tap, HSS, shape D
TAP-HELCINRT-GRND/THRGHO-HSSG-M12X1,75
Register now and access more than 20,000 products
Single-cut tap for creating receiving threads for W.Tec® Insert Coil helical inserts.
Datasheets(X)
- Suitable for blind holes and through holes
- For machine processing and manual processing
Material | HSS-G |
Form | D |
Tolerance class | 6H modified |
Suitable for thread insert | M12 |
Thread diameter | 14.27 mm |
Thread length | 42 mm |
Core hole diameter | 12.4 mm |
Lead angle length | 5.25 mm |
Length | 91.5 mm |
Adapter type | Square-cut |
Square width | 8 mm |
Shank diameter | 10.9 mm |
Last viewed
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Single wire seal (SEAL) For uninsulated cable connector
Ring-shaped crimp cable lug DIN 46234 and similar
Allen key
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Twist drill bit HSS DIN 338 TYPE RN
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Plus Quadro-L Vario hammer drill bit
Plastic scraper set 2 pieces
MFD-S multi-purpose drill bit with straight shank