Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Screw tap, HSS, shape D
TAP-HELCINRT-GRND/THRGHO-HSSG-M3X0,5
Register now and access more than 20,000 products
Single-cut tap for creating receiving threads for W.Tec® Insert Coil helical inserts.
Datasheets(X)
- Suitable for blind holes and through holes
- For machine processing and manual processing
Materiale | HSS-G |
Form | D |
Tolerance class | 6H modified |
Suitable for thread insert | M3 |
Thread diameter | 3.65 mm |
Thread length | 16.5 mm |
Core hole diameter | 3.2 mm |
Lead angle length | 1.5 mm |
Længde | 53 mm |
Adapter type | Square-cut |
Square width | 2.7 mm |
Shank diameter | 3.5 mm |
Last viewed
Threaded bushing For repairing car spark plugs, TIME-SERT®
Silicone acetate bathroom unit
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Vehicle dry sandpaper disc Arizona® Perfect
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
PLT-86 PA cable tie with detectable blue INDUSTRY plastic latch
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
Tensioning washer For screw connections DIN 6796, spring steel C60, mechanically applied zinc coating
Natural rubber wrapping tape anthracite For FLEXEN® rubber foam refrigeration insulation
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly