Slide hammer for internal pullers with M7 and M10 thread
Slide hammer for internal extractor M7/M10
SLIDHAM-INEXTR-D(6-40MM)
Register now and access more than 20,000 products
- M7 and M10 connection thread
- For 5–35 mm bore diameters
After positioning the internal puller, bolt the slide hammer bar to the spindle and actuate the slide hammer.
 | |
Length (L) | 280 mm |
Weight | 0.4 kg |
Min./max. drill hole diameter | 5-35 mm |
Datasheets(X)
Last viewed
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
Twist drill bit HSS DIN 338 type RN 130°
Hexagon nut with clamping piece (all-metal) DIN 6925, steel 8, zinc-plated, blue passivated (A2K)
Hexalobular-type cheese head screw, low head ISO 14580, blue passivated zinc plated 8.8 steel (A2K)
Twist drill bit HSCo DIN 338 MFD Speed
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)