Soft solder paste no. 30 With brush
Soft solder paste no. 30 with brush
SFTSLDRPAST-NO30-BRUSH-250G
Register now and access more than 20,000 products
- Flux DIN EN 29454-1/3.1.1.C
- Solder S-Sn 97 Cu 3 DIN EN ISO 9453 (content 60% by weight)
- Residues are soluble in cold water
The flux residues are corrosive and must be removed from the outside by wiping and from the inside by flushing.
Datasheets(X)
Ready-to-use soft solder paste for pre-tinning and soft soldering in copper pipe installation in conjunction with fitting solder. Suitable for cold and hot water installations with copper pipes according to DVGW/GW 2 and GW 7
Using the brush, apply the soft solder paste to the surfaces cleaned beforehand with cleaning fleece. Bring the solder joint evenly to the working temperature (approx. 300ºC) and then add the fitting solder. The soldering work can be carried out by means of flame or resistance heating.
Weight of content | 250 g |
Colour | Grey |
Material designation | S-Sn97Cu3 |
Shelf life from production | 24 Month |
EN standard | 29454-1 |
DIN | 8511 |
pH value | 7 |
Min. flashing point | 135 °C |
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Twist drill bit HSS DIN 338 type RN 130°
piasta® drilling screw, round head with recessed head
ORSY®BULL drawer box series 5
Screw-on fastening base
Cable ties with metal latch closure – industrial quality
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexalobular-type cheese head screw, low head
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Polypropylene cable ties– industrial quality