Spacer washer
Spacer steel plain tolerance according to DIN 522
DISC-SPCE-TOLDIN522-A-30X42X1,0
Register now and access more than 20,000 products
Spacer washers/compensating discs are used to easily balance out existing tolerances when positioning and securing a shaft, an axle or other machine parts. They can also be used as shim rings to minimise the normal movement play caused by the production tolerances of retaining rings and rivets.
The item number indicates: 0420 10 203
- >Prefix number
- >Internal diameter
- >Outer diameter
- The last digit is the thickness:
>>2=0.2 mm, 3=0.3 mm, 5=0.5 mm, 1=1.0 mm
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 420 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Internal diameter (d1) | 30 mm |
Outer diameter (d2) | 42 mm |
Thickness (h1) | 1.0 mm |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Hexagon nut, low profile, with clamping piece (non-metal insert)
Special tool - adapter For pressure loss tester
Half-shell trapezoidal crimping insert
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Hexagon nut, low profile, with clamping piece (non-metal insert)
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Screw-on fastening base – countersunk head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel