Speed Omni-Cut diamond cutting disc, construction site For hand-held cutters and floor saws
Diamond cutting disc Speed Omni-Cut HC/JC
CUTDISC-DIA-SP-OMNICUT-BR20,0-D350MM
ZEBRA
Register now and access more than 20,000 products
Flexible and fast
Perfect for all users who do not do a great deal of cutting, but for whom flexibility and speed are important.
Cuts virtually all materials
Diamonds applied directly to the main blade with a special vacuum process (BSL) form an extremely aggressive abrasive surface that functions even with tough materials.
Easier to use
Additional grinding surfaces of silicon carbide on the main blade widen the cut and enable more pleasant cutting.
Considerably cooler cutting
In conjunction with cooling openings configured as captive running direction arrows, cooling openings located directly under the segment provide for optimum cooling in the main blade.
- Diamond cutting discs become dull at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds
- If the ease of cutting decreases (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Separate larger cross-sections of workpiece into several sections (oscillating cut)
- Work without pressure - the weight of the power tool is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs - risk of injury!
- Although the tool is safe, always wear safety goggles and clothing while working
- Observe the information on the label (max. rotation speed!), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the power tool's direction of rotation
- Do not use for side sanding
- Use the appropriate protective cover
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
For dry and wet cutting
Versatility (points system) | 4 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting speed (point system) | 4 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter (Ø) | 350 mm |
Drill hole | 20 mm |
Segment height | 6 mm |
Segment thickness | 3.1 mm |
Number of segments | 24 PCS |
Segment connection | BSL |
Max. rotation speed | 5400 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Ring-shaped crimp cable lug DIN 46234 and similar
Lock washer S Spring steel with mechanically applied zinc coating (≤ dia. 3.5 zinc-plated, blue passivated)
Single wire seal (SEAL) For uninsulated cable connector
Expander tool for drop-in anchors, without visual installation control
Brass spacer stud
Plus Quadro-L Vario hammer drill bit
Brass spacer stud
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Half-shell pin crimping insert
Cable ties with plastic latch closure – industrial quality